XG-19ILTE MT INS

PARTS LIST - XG-19ILTE BOLT KIT - XG-BRK14, XG-BRK7 COMPATIBLE GUARDS XG-100, XG-125, XG-150 • LT-325, LT-350 • HD-400, HD-425, HD-450 •

5

3

1

7

6

2

4

EXPLODED VIEW/QTY.

ITEM NO.

PART NUMBER

DESCRIPTION

1 XG-19ILT-BR05SA

CROSSBAR FOR XG-19ILT/E MOUNTING BRACKET FOR XG-19ILTE

1

2 XG-19ILTE-BR10

2 2 2 2

3 XG-001-87C550HCS8Y 1-8x5 1/2" Hex Cap GR8 Z&Y

4 XG-17ILTE-BR08

BACKUP WASHER W/ NUT

5 XG-001-87NWMD0Y 7/8" GRADE 8 FLAT WASHER

5/8-11 Serr FlangeLn Hard ZINC 5/8-11X4 Hex CapGR8 Z&Y

6 XG-001-

4

62CNWF0Z_HARD

7 XG-001-

4

62C400HCS8Y

© THIS DRAWING IS THE PROPERTY OF EX-GUARD INDUSTRIES, INC. COPYRIGHT IS RESERVED BY THEM AND THE DRAWING ISSUED ON CONDITION THAT IT MUST NOT BE USED FOR ANY OTHER PURPOSE OTHER THAN FOR WHICH IT WAS SUPPLIED AND NOT TO BE COPIED, REPRODUCED, RETAINED OR DISCLOSED TO ANY UNAUTHORIZED PERSON EITHER WHOLLY OR IN PART WITHOUT THE CONSENTIN WRITING OF EX-GUARD INDUSTRIES INC. ATTENTION!! Any Ex-Guard grille guard, bracket kit, or hardware must be used with corresponding Ex-Guard components. Use of any other product or brand with Ex-Guard products will immediately void the warranty provided by Ex-Guard Industries.

MOUNTING INSTRUCTIONS - XG-19ILTE MTS INS INTERNATIONAL PROSTAR AND LT SERIES WITH STEEL BUMPER

3) TORQUE TO 500FT/LBS PRIOR TO INSTALLING THE EX-GUARD.

4) INSTALL THE EX-GUARD BY INSERTING 5/8 STUDS INTO BRACKET SLOTS, INSTALL FLANGE NUTS TORQUE NUT TO 150 FT LBS.

1) INSERT THIS END INTO THE TOW HOOK RECEIVER, INCLUDING THE BOLT AND NUT AS

2) INSTALL THE CROSS TUBE INTO THE MOUNTING BRACKETS BY INSERTING 5/8 BOLTS THROUGH THE CHANNEL, INSTALL FLANGE NUTS, TORQUE NUT TO 150 FT LBS.

SEEN IN THE ILLUSTRATION BELOW, SNUG THE BOLT UP, STILL ALLOWING THE BRACKET TO SWIVEL.

IMPORTANT!! Any Ex-Guard grille guard, bracket kit, or hardware must be used with corresponding Ex-Guard components. Use of any other product or brand with Ex-Guard products will immediately void the warranty provided by Ex-Guard Industries.

©

THISDRAWING ISTHEPROPERTYOFEX-GUARD INDUSTRIES, INC.COPYRIGHT ISRESERVEDBYTHEMANDTHEDRAWING ISSUEDONCONDITIONTHAT ITMUSTNOTBEUSEDFORANYOTHERPURPOSEOTHER THANFORWHICH ITWASSUPPLIEDANDNOTTOBECOPIED,REPRODUCED,RETAINEDORDISCLOSEDTOANYUNAUTHORIZEDPERSONEITHERWHOLLYOR INPARTWITHOUTTHECONSENTINWRITINGOF EX-GUARD INDUSTRIES INC.